Post by 00transram on Jan 29, 2010 16:21:49 GMT -6
Relisting the car. Serious about selling. This car is the fastest "door-slammer" (formerly street legal) to have EVER turned a lap at No Problem Raceway (1:19.048)(edit: I've been informed that Johnny Walters' and Christian Francois' cars used to be street cars, so perhaps it's 3rd fastest). The car also won the Grand Bayou Race Series state championship for the 2008-2009 series. I've owned this car from a 100% stock car and built it to what it is today. Her nickname is "The Red Rhino".
Most of you know this car. She’s dead reliable (only GT2 car to start and finish all GBRS 08-09 race, I think) and faster than snot. She made 411rwhp and 417rwtq with all the new mods (old numbers were about 340/360).
DRIVETRAIN
- LS1 motor, fresh partial-rebuild w/ 0 miles (except dyno tuning), including:
o TR 230/224 .575/.563 111LSA "Reverse Split" camshaft (new)
o LS7 lifters (new)
o Comp Cams "925" double valve springs (new design, better resistance to fatigue from high RPMs) (new)
o Comp Cams tooled steel spring retainers (will not fatigue like titanium, almost as light) (new)
o Comp Cams 5/16" pushrods (new)
o New valve seals (new)
o Stock rocker arms w/ Comp Cams trunion bearings (new)
o Refreshed "241" heads (new)
o Manley double-roller timing chain (new)
o LS2 lifter trays (new)
o 3-layer metal head gaskets (new)
o ARP Pro-Series "Cracked Rod" rod bolts (new)
o Racetronix 32lb fuel injectors (new)New front and rear main seals, plus all gaskets (new)
- Lightweight clutch and flywheel (stock unit = 49.8lbs; this unit weighs 19.8lbs, and is smaller in diameter)
o 7.25" 3-disc Quarter Master Optimum-V clutch (new disc thickness = .104"; all 3 discs measure at .103")
o 7.25" button flywheel bolted to stock flexplate (new)
o ARP fasteners (new)
o Quartermaster 4.5"/5.5" floating-style hydraulic throwout bearing
o Steel braided lines, with easily accessible bleeder valve (new)
o McLeod adjustable master cylinder (rebuilt)
- Improved Racing oil pan windage tray and baffles
- Racetronix fuel pump and wiring harness (new)
- Whisper filter lid
- Ported/polished throttle body (new)
- LS6 intake manifold
- Hooker 1.75" LT headers
- Freshly rebuilt transmission with 6 races
o Steel 3-4 shift fork w/ bronze fork pads
o New 1-2, 3-4 carbon-kevlar synchronizers
o New rings, spacers, washers, gaskets etc.
- Torsen T2R LSD (one of the "good" ones, before all the problems)
SUSPENSION
- Front
o Spohn front upper a-arms, fully adjustable w/ ¾" rod ends (new)
o Custom, adjustable lower arms (stock arms, with ends cut off and ¾" rod ends inside chromoly tubing) (new)
35mm hollow front swaybar
o 700lb coilover springs
o Afco 1375 shocks (aluminum, threaded-body, rebuildable)
o Rear
o Custom, adjustable, aluminum lower control arms w/ ¾" rod ends
o 275lb springs w/ adjustable perches
o Afco 1074-6 shocks (steel body, stock mounting locations)
o Adjustable panhard rod
o Unbalanced Engineering de-coupled race torque arm
o Hellwig adjustable ¾" swaybar
o Static -.4* camber in rear axle
BRAKES
- Baer GT-Plus calipers (front)
- Baer 2-piece rotors, non-slotted/drilled (front)
- ABS delete
o (With Carbotech XP-12 pads front, AX6 pads rear, and Wilwood 570 fluid, I've never experienced fade or overheating)
WHEELS and TIRES
- 18x10.5 C6 replicas w/ corded Goodyear slicks
- 27/68-18 Michelin "Yellow" slicks (only a single qualifying session on the tires)
MISC
- Full SCCA/NASA-legal cage (1.625x.134)
- Adjustable APR 300-series wing (300lbs downforce @ 100mph)
- Car lightened to less than 3000lbs including gas (great weight distribution and cross-weights)
- Momo FIA-approved seat w/ 5-point cam-lock harness
- Oil pressure, oil temp, water temp gauges w/ warning lights
- Large programmable tach w/ shift light
- Camera mount welded to roll cage
- Quick-release steering wheel
- Firebottle fire suppression system for driver and engine
- Lightweight battery w/ kill switch accessible by both the driver and workers at passenger window
- Covered all holes in front bumper for aero
$13,000 obo. Please call 985-981-6572 or e-mail at mpatterson1410@yahoo.com with any questions.
Video of the 2009 Charity Challenge. Although the video cuts off the last lap, I went on to win this race (passed the BMW under braking in Turn 2).
Most of you know this car. She’s dead reliable (only GT2 car to start and finish all GBRS 08-09 race, I think) and faster than snot. She made 411rwhp and 417rwtq with all the new mods (old numbers were about 340/360).
DRIVETRAIN
- LS1 motor, fresh partial-rebuild w/ 0 miles (except dyno tuning), including:
o TR 230/224 .575/.563 111LSA "Reverse Split" camshaft (new)
o LS7 lifters (new)
o Comp Cams "925" double valve springs (new design, better resistance to fatigue from high RPMs) (new)
o Comp Cams tooled steel spring retainers (will not fatigue like titanium, almost as light) (new)
o Comp Cams 5/16" pushrods (new)
o New valve seals (new)
o Stock rocker arms w/ Comp Cams trunion bearings (new)
o Refreshed "241" heads (new)
o Manley double-roller timing chain (new)
o LS2 lifter trays (new)
o 3-layer metal head gaskets (new)
o ARP Pro-Series "Cracked Rod" rod bolts (new)
o Racetronix 32lb fuel injectors (new)New front and rear main seals, plus all gaskets (new)
- Lightweight clutch and flywheel (stock unit = 49.8lbs; this unit weighs 19.8lbs, and is smaller in diameter)
o 7.25" 3-disc Quarter Master Optimum-V clutch (new disc thickness = .104"; all 3 discs measure at .103")
o 7.25" button flywheel bolted to stock flexplate (new)
o ARP fasteners (new)
o Quartermaster 4.5"/5.5" floating-style hydraulic throwout bearing
o Steel braided lines, with easily accessible bleeder valve (new)
o McLeod adjustable master cylinder (rebuilt)
- Improved Racing oil pan windage tray and baffles
- Racetronix fuel pump and wiring harness (new)
- Whisper filter lid
- Ported/polished throttle body (new)
- LS6 intake manifold
- Hooker 1.75" LT headers
- Freshly rebuilt transmission with 6 races
o Steel 3-4 shift fork w/ bronze fork pads
o New 1-2, 3-4 carbon-kevlar synchronizers
o New rings, spacers, washers, gaskets etc.
- Torsen T2R LSD (one of the "good" ones, before all the problems)
SUSPENSION
- Front
o Spohn front upper a-arms, fully adjustable w/ ¾" rod ends (new)
o Custom, adjustable lower arms (stock arms, with ends cut off and ¾" rod ends inside chromoly tubing) (new)
35mm hollow front swaybar
o 700lb coilover springs
o Afco 1375 shocks (aluminum, threaded-body, rebuildable)
o Rear
o Custom, adjustable, aluminum lower control arms w/ ¾" rod ends
o 275lb springs w/ adjustable perches
o Afco 1074-6 shocks (steel body, stock mounting locations)
o Adjustable panhard rod
o Unbalanced Engineering de-coupled race torque arm
o Hellwig adjustable ¾" swaybar
o Static -.4* camber in rear axle
BRAKES
- Baer GT-Plus calipers (front)
- Baer 2-piece rotors, non-slotted/drilled (front)
- ABS delete
o (With Carbotech XP-12 pads front, AX6 pads rear, and Wilwood 570 fluid, I've never experienced fade or overheating)
WHEELS and TIRES
- 18x10.5 C6 replicas w/ corded Goodyear slicks
- 27/68-18 Michelin "Yellow" slicks (only a single qualifying session on the tires)
MISC
- Full SCCA/NASA-legal cage (1.625x.134)
- Adjustable APR 300-series wing (300lbs downforce @ 100mph)
- Car lightened to less than 3000lbs including gas (great weight distribution and cross-weights)
- Momo FIA-approved seat w/ 5-point cam-lock harness
- Oil pressure, oil temp, water temp gauges w/ warning lights
- Large programmable tach w/ shift light
- Camera mount welded to roll cage
- Quick-release steering wheel
- Firebottle fire suppression system for driver and engine
- Lightweight battery w/ kill switch accessible by both the driver and workers at passenger window
- Covered all holes in front bumper for aero
$13,000 obo. Please call 985-981-6572 or e-mail at mpatterson1410@yahoo.com with any questions.
Video of the 2009 Charity Challenge. Although the video cuts off the last lap, I went on to win this race (passed the BMW under braking in Turn 2).